Customer feedback analysis: Continuous screw oil pressing significantly improves oil production and quality

Continuous Screw Oil Press: A Powerful Tool for Improving Oil Product Output and Quality

Over the years, I've found that the most common pitfall for buyers is that their equipment fails to meet production requirements for oil output and quality, resulting in low production efficiency and increased costs. The continuous screw oil pressing, with its unique design, excels in resolving these issues.

Unique design analysis

The continuous screw oil pressing features three unique features: a perforated horizontal housing, a figure-8 cross-twin screw structure, and pressure control technology for the calibrating head. The perforated horizontal housing allows for rapid discharge of the pressed oil, improving extraction efficiency. The principle is similar to a sieve: the oil flows out through the small holes, while the residue remains in the housing. In practice, this design allows for rapid separation of oil and residue during the pressing process.

The Figure-8 cross twin-screw structure is a core design feature of this oil pressing. The two screws rotate in a cross pattern, fully squeezing the oil. This is like squeezing an object with two hands simultaneously from different directions, applying more uniform and stronger pressure to the oil. This structure significantly improves oil crushing and oil yield. According to statistics, continuous screw presses using the Figure-8 cross twin-screw structure can increase oil yield by 10%-15% compared to traditional oil pressinges.

The pressure control technology in the press head precisely controls the pressure during the pressing process. Different oilseeds require different pressures for optimal oil extraction. This technology acts like an intelligent regulator, automatically adjusting the pressure based on the characteristics of the oilseed. For example, when pressing peanuts, the pressure can be controlled within an appropriate range, ensuring sufficient oil extraction without over-pressing and degrading the oil quality.

Multi-scenario application cases

Continuous screw oil pressinges excel in a variety of oil-pressing scenarios. For example, a peanut press factory previously used traditional oil pressinges, resulting in a residual oil rate of up to 8%, low oil extraction efficiency, and unstable oil quality. After introducing the continuous screw oil pressing, the factory reduced the residual oil rate to below 3% through the use of a perforated horizontal housing for rapid oil drainage, a figure-8 cross-twin screw for full extrusion, and precise pressure control of the calibrating head. This significantly increased oil extraction efficiency and significantly improved oil quality, with fewer impurities and a brighter color.

Another oil pressinging company has also received similarly positive feedback regarding rapeseed pressing. Traditional oil pressinges are prone to insufficient pressing and turbid oil when processing rapeseed. However, the continuous screw oil pressing, through its unique design, increases rapeseed oil yield by approximately 12%. It also effectively controls kernel breakage, reduces impurities in the oil, and improves oil purity and stability.

Customer feedback and cost-effectiveness

Numerous customers have reported that the continuous screw oil pressing performs reliably and consistently. During long production runs, equipment failures are rare, reducing maintenance costs and downtime, and improving production efficiency. Furthermore, its operation is relatively simple, enabling workers to become proficient after a short training period, thus reducing labor costs. From a cost-effective perspective, while the equipment purchase cost may be slightly higher than that of a traditional oil pressing, in the long term, the increased oil yield, reduced residual oil content, and reduced maintenance costs can lead to significant cost savings and higher economic benefits for businesses.

Are you struggling with the efficiency and quality of your oil pressinging equipment? A continuous screw oil pressing may be the solution you've been looking for. It offers exceptional efficiency, cost-effectiveness, and reliability, meeting your production needs. If you have any questions, we have an FAQ section, and we welcome your inquiries in the comments section.

Have you encountered similar problems in your industry? Could you please share your specific scenarios and send me three case studies of solutions from your industry?Learn more about the continuous screw oil pressing now and start your journey to efficient oil extraction!